Marco Cipher Lab 1560 Especificaciones Pagina 30
- Pagina / 243
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
18
Enter Setup
1560 Series Barcode Scanner User Guide
The example below shows how to set string parameters:
Steps
Action User Feedback if Successful
1 Power on the scanner...
T
he scanner will respond with a long beep
(high tone) and its LED indicator will
become solid red and go off quickly.
2 Enter the Configuration Mode…
T
he scanner will respond with six beeps
(high-low tone repeats three times), and
its LED indicator will become flashing red.
Read a Setup barcode...
For example,
The scanner will respond with one short
beep if reading a special setup barcode
such as “Prefix Code”, indicating the setup
requires reading more barcodes.
When “BT HID”, “USB HID” or “Keyboard
Wedge”
is configured for interface, Key
T
ype and Key Status will then become
applicable. You may decide whether or not
to change key status when “Normal Key”
is selected for Key Type.
Refer to Appendix III
3
Read the “Hexadecimal Value” barcodes
for the desired character string. For
example, read “2” and “B” for the scanner
to prefix the character “+”.
Refer to Appendix IV “Hexadecimal
System”
T
he scanner will respond with two beeps
(low-high
tone) when the input values are
validated.
4 Exit the Configuration Mode…
OR
Same as for Enter the Configuration Mode.
5 The scanner will automatically restart itself… Same as for Power on the scanner.
Hexadecimal
barcodes
Special setup
barcodes
- 1560/1562 Barcode Scanne 1
- IMPORTANT NOTICES 3
- RELEASE NOTES 5
- CONTENTS 7
- INTRODUCTION 13
- SETTING UP 3656 15
- Introduction 17
- SYMBOLOGIES SUPPORTED 20
- QUICK START 23
- ENTER CONFIGURATION MODE 25
- EXIT CONFIGURATION MODE 25
- Quick Start 27
- Refer to Appendix III 30
- LIST THE CURRENT SETTINGS 31
- Chapter 1 35
- 1.1.2 POWER ECONOMY 36
- Chapter 1 39
- 1.2 MEMORY 41
- 1.2.1 TRANSMIT BUFFER 41
- 1.2.2 MEMORY MODE 42
- 1.3.1 GOOD READ LED 45
- 1.3.2 GOOD READ LED DURATION 45
- Beeping 46
- Meaning 46
- 1.4.1 BEEPER VOLUME 47
- 1.4.2 GOOD READ BEEP 48
- 1.4.3 LOW BATTERY ALARM 49
- 1.5 SEND “NR” TO HOST 50
- 1.6 SCAN MODES 51
- 1.6.6 ALTERNATE MODE 54
- 1.6.7 AIMING MODE 54
- 1.6.8 MULTI-BARCODE MODE 55
- 1.8 DELAY BETWEEN RE-READ 57
- Continuous mode 57
- Auto Power Off mode 57
- Alternate mode 57
- *Disable 60
- 1.13 NEGATIVE BARCODES 62
- 1.14 EFFECTIVE DECODING AREA 63
- 1.14.1 POSITIONING WINDOW 63
- 1.14.2 ADJUSTING WINDOW 64
- Chapter 2 65
- 2.1 BT HID 66
- 2.1.2 RESET CONNECTION 68
- US Keyboard Style – Normal 70
- 70
- Cap Lock Type Description 72
- Alphabets Transmission 74
- 2.1.4 INTER-CHARACTER DELAY 76
- 2.1.5 INTER-FUNCTION DELAY 76
- 2.2 BT SPP SLAVE 78
- 2.2.2 INTER-FUNCTION DELAY 78
- 2.2.3 ACK/NAK TIMEOUT 79
- 2.3 BT SPP MASTER 80
- “Set Connection” 80
- “MAC ID” 80
- 2.3.2 INTER-FUNCTION DELAY 82
- 2.3.3 ACK/NAK TIMEOUT 83
- 2.4 KEYBOARD WEDGE VIA 3656 84
- 2.4.3 INTER-CHARACTER DELAY 94
- 2.4.4 INTER-FUNCTION DELAY 94
- 2.5 RS-232 VIA 3656 95
- 2.5.2 BAUD RATE 95
- 2.5.3 DATA BITS 96
- 2.5.4 PARITY 96
- 2.5.5 STOP BIT 97
- 2.5.6 FLOW CONTROL 97
- 2.5.7 INTER-CHARACTER DELAY 98
- 2.5.8 INTER-FUNCTION DELAY 98
- 2.5.9 ACK/NAK TIMEOUT 99
- 2.6 USB HID VIA 3656 100
- Chapter 2 101
- Selecting Output Interface 101
- Enter Setup 106
- *Capital Lock OFF 106
- 2.6.3 INTER-CHARACTER DELAY 109
- 2.6.4 INTER-FUNCTION DELAY 109
- 2.7.2 INTER-FUNCTION DELAY 111
- 2.7 USB VIRTUAL COM VIA 3656 111
- 2.7.3 ACK/NAK TIMEOUT 112
- Chapter 3 113
- 3.1 CONNECTING VIA 3656 114
- 3.1.1 CONNECT TO 3656 114
- “Set Connection” label 114
- “Serial Number” label 114
- 3.1.2 CHANGE INTERFACE 115
- Sniff Mode (Power-saving) 116
- 3.2 CONNECTING VIA BLUETOOTH 117
- DONGLE 117
- 3.2.1 CHANGE INTERFACE 117
- 107 119
- Authentication 119
- 3.2.3 CONNECT TO DONGLE 121
- Chapter 3 123
- Chapter 4 129
- 4.1 CODABAR 130
- 4.1.3 CLSI CONVERSION 131
- 4.2 CODE 25 – INDUSTRIAL 25 132
- 4.2.2 VERIFY CHECK DIGIT 133
- 4.2.3 TRANSMIT CHECK DIGIT 133
- 4.3 CODE 25 – INTERLEAVED 25 135
- 4.3.2 VERIFY CHECK DIGIT 136
- 4.3.3 TRANSMIT CHECK DIGIT 136
- Chapter 4 137
- Changing Symbology Settings 137
- 4.4 CODE 25 – MATRIX 25 138
- 4.4.2 VERIFY CHECK DIGIT 139
- 4.4.3 TRANSMIT CHECK DIGIT 139
- 4.5 CODE 39 141
- 4.5.2 VERIFY CHECK DIGIT 141
- 4.5.3 TRANSMIT CHECK DIGIT 142
- 4.6 CODE 93 143
- 4.7 CODE 128 143
- 4.8 EAN-8 144
- 4.8.1 CONVERT TO EAN-13 145
- 4.8.2 TRANSMIT CHECK DIGIT 145
- 4.9 EAN-13 146
- 4.9.1 ISBN CONVERSION 147
- 4.9.2 ISSN CONVERSION 147
- 4.9.3 TRANSMIT CHECK DIGIT 147
- 4.9.4 SECURITY LEVEL 148
- 4.10 GS1-128 (EAN-128) 149
- 4.10.1 CODE ID TRANSMISSION 149
- 4.11 ISBT 128 150
- 4.12 MSI 151
- 4.12.1 VERIFY CHECK DIGIT 151
- 4.12.2 TRANSMIT CHECK DIGIT 151
- 4.13 FRENCH PHARMACODE 153
- 4.13.1 TRANSMIT CHECK DIGIT 153
- 4.14 ITALIAN PHARMACODE 154
- 4.14.1 TRANSMIT CHECK DIGIT 154
- 4.15 PLESSEY 155
- 4.15.1 CONVERT TO UK PLESSEY 155
- 4.15.2 TRANSMIT CHECK DIGIT 155
- GS1 DataBar Expanded 159
- Transmit Code ID 160
- Transmit Application ID 160
- Transmit Check Digit 160
- 4.17 TELEPEN 161
- 4.18 UPC-A 162
- 4.18.1 CONVERT TO EAN-13 163
- 4.18.3 TRANSMIT CHECK DIGIT 163
- 4.19 UPC-E 164
- 4.19.4 TRANSMIT CHECK DIGIT 166
- Chapter 5 167
- Chapter 5 169
- Defining Output Format 169
- 5.4.2 CHANGE CODE ID 179
- 5.4.3 CLEAR CODE ID SETTINGS 180
- 5.5 LENGTH CODE 181
- 5.6 MULTI-BARCODE EDITOR 185
- Code Type 185
- Remove Special 188
- Character 188
- Chapter 6 189
- 6.1.2 EXCLUSIVE DATA EDITING 191
- End Programming Format 192
- 6.2.2 RESTORE DEFAULT FORMAT 194
- 6.3.1 APPLICABLE CODE TYPE 195
- 189 201
- 6.3.2 DATA LENGTH 202
- 6.4.3 TOTAL NUMBER OF FIELDS 205
- 6.4.4 FIELD SETTINGS 206
- Field 3 Setting 208
- 197 209
- Field 4 Setting 209
- Field 5 Setting 210
- 199 211
- Additional Fields 211
- Key Type Key Status 211
- 6.4.5 PAUSE FIELD SETTING 212
- 6.6 PROGRAMMING EXAMPLES 215
- 6.6.1 EXAMPLE I 215
- SPECIFICATIONS 217
- Appendix I 219
- Click [OK] 220
- Appendix I Firmware Upgrade 221
- USING BLUETOOTH 222
- HOW TO UPGRADE 3656 FIRMWARE 224
- Appendix II 229
- Appendix II 231
- Host Serial Commands 231
- 3656 SERIAL COMMAND TABLE 232
- EXAMPLE 234
- Appendix III 235
- KEY TYPE & STATUS 236
- KEY TYPE 236
- KEY STATUS 236
- Appendix IV 239
- HEXADECIMAL SYSTEM 240
- ASCII TABLE 241
- USE PRESET PIN 242
© 2020, manymanuals.es. Todos los derechos reservados | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales